RF = Raised Face

For Valves with Flanges, 2 popular facings are:
a) Raised Face, commonly known as RF;
b) Ring Joint, commonly known as RTJ, Ring To Joint.

There are 2 type of RF:
a) 2 mm Raised Face,
b) 7 mm Raised Face.

2 mm Raised Face is used on flanges of  valves with pressure rating of 150LB and 300LB.

7 mm Raised Face is used on flanges of  valvs with pressure rating of 400LB, 600LB, 900LB, 1500LB and 2500LB.

For RTJ flanges, it is important to know the Groove Number (also known as R Number, or Ring Number).  So we know what-size Ring to use for the RTJ groove.

A good standard to read about RF flange dimensions and RTJ flange dimensions is ASME B16.5 - Pipe Flanges and Flange Fittings.

ASME Class 600 and 900 Valves –Gate, Globe, Check, Ball

Table 3 shows the Face-to-Face and End-to-End dimensions of ASME class 600LB valves.  Table 4 shows the ASME class 900LB valves.  Valve types listed in Table 5 of ASME B16.10 are Gate Valves, Plug Valves, Globe Valves, Lift Check Valves, Swing Check Valves, Angle Valves, and Ball Valves.

For ASME class 600, long-pattern Gate Valves, size range is NPS ½ ” up to NPS 36”, connections are flanges and welding ends.  For class 600 short-pattern Gate Valves, size range is NPS 1” up to NPS 24”, connection is welding ends. For size of NPS 1” up to NPS 12”, there is obvious dimensional difference between long-pattern and short-pattern valves.

For ASME class 900, long-pattern Gate Valves, size range is NPS 1” up to NPS 24”, connections are flanges and welding ends.  For class 900 short-pattern Gate Valves, size range is NPS 1” up to NPS 16”, connection is welding ends.  There is obvious dimensional difference between long-pattern and short-pattern valves, for size of NPS 1” up to NPS 16”.

For ASME class 600, long-pattern Globe Valves, size range is NPS ½ ” up to NPS 36”, connections are flanges and welding ends.  For class 600 short-pattern Globe Valves, size range is NPS 1” up to NPS 12”, connection is welding ends.  For size range of NPS 1” up to NPS 12”, there is obvious dimensional difference between long-pattern and short-pattern valves.

For ASME class 900, long-pattern Globe Valves, size range is NPS  ¾ ” up to NPS 24”, connections are flanges and welding ends.  For class 900 short-pattern Globe Valves, size range is NPS 2 ½ ” up to NPS 16”, connection is welding ends.  For size range of NPS 2 ½ ” up to NPS 16”, there is obvious dimensional difference between long-pattern and short-pattern valves.

For ASME class 600, long-pattern Globe Valves, size range is NPS ½ ” up to NPS 36”, connections are flanges and welding ends.  For class 600 short-pattern Globe Valves, size range is NPS 1” up to NPS 12”, connection is welding ends.  For size range of NPS 1” up to NPS 12”, there is obvious dimensional difference between long-pattern and short-pattern valves.

For ASME class 900, long-pattern Swing Check Valves, size range is NPS  ¾ ” up to NPS 24”, connections are flanges and welding ends.  For class 900 short-pattern Swing Check Valves, size range is NPS 2 ½ ” up to NPS 16”, connection is welding ends.  For size range of NPS 2 ½ ” up to NPS 16”, there is obvious dimensional difference between long-pattern and short-pattern valves.

For ASME class 600, long-pattern Lift Check Valves, size range is NPS ½ ” up to NPS 36”, connections are flanges and welding ends.  For class 600 short-pattern Globe Valves, size range is NPS 1” up to NPS 12”, connection is welding ends.  For size range of NPS 1” up to NPS 12”, there is obvious dimensional difference between long-pattern and short-pattern valves.  Lift Check Valve is also known as Piston Check Valve.

For ASME class 900, long-pattern Lift Check Valves, size range is NPS  ¾ ” up to NPS 24”, connections are flanges and welding ends.  For class 900 short-pattern Lift Check Valves, size range is NPS 2 ½ ” up to NPS 16”, connection is welding ends.  For size range of NPS 2 ½ ” up to NPS 16”, there is obvious dimensional difference between long-pattern and short-pattern valves. Lift Check Valve is also known as Piston Check Valve.

For ASME class 600, long-pattern Ball Valves, size range is NPS 1” up to NPS 24”, connections are flanges and welding ends.  There is no short-pattern specified for Ball Valves. 

For ASME class 900, long-pattern Ball Valves, size range is NPS 1” up to NPS 24”, connections are flanges and welding ends.  There is no short-pattern specified for Ball Valves. 


Reference:
ASME B16.10  -  Face-to-Face and End-to-End Dimensions of Valves.
Table 3  –  Class 600 Steel Flanged and Buttwelding End Valves, Face-to-Face and End-to-End Dimensions.
Table 4  –  Class 900 Steel Flanged and Buttwelding End Valves, Face-to-Face and End-to-End Dimensions.

Author welcomes comments at valve4oem@gmail.com
Facebook Personal:  www.facebook.com/Michael.Valves
Facebook Page:  www.facebook.com/ValvesForOilAndGas

ASME Class 1500 Valves – Ball, Gate, Globe, Check

Table 5 shows the Face-to-Face and End-to-End dimensions of ASME class 1500LB valves.  Valve types listed in Table 5 of ASME B16.10 are Gate Valves, Plug Valves, Globe Valves, Lift Check Valves, Swing Check Valves, Angle Valves, and Ball Valves.

For long-pattern Ball Valves, size range is NPS 2” up to NPS 16”, connections are flanges and welding ends.  There is no short-pattern specified for Ball Valves. 

For long-pattern Gate Valves, size range is NPS 1” up to NPS 24”, connections are flanges and welding ends.  For short-pattern Gate Valves, size range is NPS 1” up to NPS 20”, connection is welding ends.

For long-pattern Globe Valves, size range is NPS ½” up to NPS 24”, connections are flanges and welding ends.  For short-pattern Globe Valves, size range is NPS 2” up to NPS 16”, connection is welding ends.  For size range of NPS 2” up to NPS 16”, there is obvious dimensional difference between long-pattern and short-pattern valves.

For long-pattern Swing Check Valves, size range is NPS ½” up to NPS 24”, connections are flanges and welding ends.  For short-pattern Swing Check Valves, size range is NPS 2” up to NPS 16”, connection is welding ends.  For size range of NPS 2” up to NPS 16”, there is obvious dimensional difference between long-pattern and short-pattern valves.

For long-pattern Lift Check Valves, size range is NPS ½” up to NPS 24”, connections are flanges and welding ends.  For short-pattern Lift Check Valves, size range is NPS 2” up to NPS 16”, connection is welding ends.  For size range of NPS 2” up to NPS 16”, there is obvious dimensional difference between long-pattern and short-pattern valves.  Lift Check Valve is also known as Piston Check Valve.

Reference:
ASME B16.10  -  Face-to-Face and End-to-End Dimensions of Valves.
Table 5  –  Class 1500 Steel Flanged and Buttwelding End Valves, Face-to-Face and End-to-End Dimensions.

Author welcomes comments at valve4oem@gmail.com
Facebook Personal:  www.facebook.com/Michael.Valves
Facebook Page:  www.facebook.com/ValvesForOilAndGas

ASME Class 2500 Valves – Gate, Globe, Check, Ball

Valve types listed in Table 6 of ASME B16.10 are Gate Valves, Plug Valves, Globe Valves, Lift Check Valves, Swing Check Valves, Angle Valves, and Ball Valves.

For long-pattern Gate Valves, size range is NPS ½” up to NPS 12”, connections are flanges and welding ends.  For short-pattern Gate Valves, size range is NPS 1” up to NPS 18”, connection is welding ends.

For long-pattern Globe Valves, size range is NPS ½” up to NPS 12”, connections are flanges and welding ends.  For short-pattern Globe Valves, size range is NPS 2” up to NPS 12”, connection is welding ends.  For size range of NPS 2” up to NPS 8”, face-to-face and end-to-end dimensions for Long Pattern and end-to-end dimensions for Short Pattern are similar.  In other words, the differential longer and shorter Gate Valves are applicable only for size NPS 10” and NPS 12”.

For long-pattern Swing Check Valves, size range is NPS ½” up to NPS 12”, connections are flanges and welding ends.  For short-pattern Swing Check Valves, size range is NPS 2” up to NPS 12”, connection is welding ends.  For size range of NPS 2” up to NPS 8”, face-to-face and end-to-end dimensions for Long Pattern and end-to-end dimensions for Short Pattern are similar.  In other words, the differential longer and shorter Swing Check Valves are applicable only for size NPS 10” and NPS 12”.

For long-pattern Lift Check Valves, size range is NPS ½” up to NPS 12”, connections are flanges and welding ends.  For short-pattern Lift Check Valves, size range is NPS 2” up to NPS 12”, connection is welding ends.  For size range of NPS 2” up to NPS 8”, face-to-face and end-to-end dimensions for Long Pattern and end-to-end dimensions for Short Pattern are similar.  In other words, the differential longer and shorter Lift Check Valves are applicable only for size NPS 10” and NPS 12”.  Lift Check Valve is also known as Piston Check Valve.

For long-pattern Ball Valves, size range is NPS 2” up to NPS 12”, connections are flanges and welding ends.  There is no short-pattern specified for Ball Valves. 

Reference:
ASME B16.10  -  Face-to-Face and End-to-End Dimensions of Valves.
Table 6  –  Class 2500 Steel Flanged and Buttwelding End Valves, Face-to-Face and End-to-End Dimensions.


Author welcomes comments at valve4oem@gmail.com
Facebook Personal:  www.facebook.com/Michael.Valves
Facebook Page:  www.facebook.com/ValvesForOilAndGas

POVE Valves - Ball, Gate, Globe, Check, DBB: POVE brand Small Forged Ball Valves

POVE Valves - Ball, Gate, Globe, Check, DBB: POVE brand Small Forged Ball Valves

Difference between API 6D and API 6A Valves

API 6D and API 6A are both standards used for Valves in the oil and gas industry.  What is the difference?  Why is API 6D more popular?

API 6D is standard or specification for valves in any pipeline, including rigs, platforms, skids and production plants.  API 6A is standard or specification for valves used in wellhead and Christmas tree equipment.

In terms of usage, there are many more pipeline valves used as compared to wellhead valves. 

In terms of ease of manufacture, pipeline valves are more easily manufactured as compared to wellhead valves.

In terms of pressure rating, the most common rating for API 6D valves are from 150LB to 2500LB, i.e. 150LB, 300LB, 600LB, 800LB, 900LB, 1500LB, and 2500LB.  API 6A valves are pressure rated for 2000LB up to 20000LB, i.e. 2000LB, 3000LB, 5000LB, 10000LB, 15000LB, and 20000LB.

Generally, the pressure rating for API 6A valves are higher than API 6D valves.


The Author welcomes comments at  valve4oem@gmail.com

Facebook Personal:  www.facebook.com/Michael.Valves
Facebook Page:  www.facebook.com/ValvesForOilAndGas

API Standards for Valves

There are several API standards concerning valves.

API is abbreviation for American Petroleum Institute.

API 598 Valve Inspection & Testing
API 598 details all the testing and inspection requirements for gate, globe, plug, ball, check and butterfly valves. ASME/ANSI B16.34 determine the test pressures required for API 598.  For steel valves, ASME B16.34 need to be used in conjunction with API 598.

API 6D Specification for Pipeline Valves (Plug, Gate, Ball and Check Valves)
API 6D is the standard used for valves in pipeline service. API 6D has more stringent testing requirements compared to the API 600, 602, 608 or 609 design criteria. API 6D check valves are used in applications requiring pigging as the spec indicates the flapped cannot impede flow through the valve.
API 6D is the most popular standard used for valves for petrochemical, oil and gas industry.

API 600 - Steel Valves - Flanged & Buttwelding Ends
API 600 is the primary steel gate valve specification. API 600 details valve design/construction criteria as well as material/trim designations. ISO 10434 is a similar spec published in the ISO format.

API 602 - Compact Steel Gate Valves-Flanged, Threaded, Welding and Extended-Body Ends
API 602 is for 4" and smaller forged steel gate valves. Like API 600 the spec details valve design/construction criteria as well as material/trim designations.

API 603 - Corrosion-Resistant, Bolted Bonnet Gate Valves – Flanged and Butt-Welding Ends
API 603 is the specification for light-walled threaded gate valves ranging through ½" to 24" in ANSI 150, 300 and 600. API 603 is for thin walled applications where the thicker API 600 is not required.

API 607 (API 6FA) -API 607 is a fire test for soft-seated quarter turn valves; the standard covers testing and performance requirements for valves exposed to certain fire conditions defined in the standard. The procedures defined in this standard apply to all valves made from materials listed in ASMB B16.34. API 6FA is the fire test spec for API Spec 6A and 6D valves; API 6FC is the fire test for valves with automatic backseatsAPI Spec 6A and 6D valves.

API 608 - Metal Ball Valves- Flanged and Butt-Welding Ends
API 608 is the specification for class 150 and 300 metal ball valves. Design and construction criteria are detailed in this spec.

API 609 - Butterfly Valves, Lug-Type and Wafer Type
API 609 is the purchase specification for lug and wafer type butterfly valves for installation between ANSE B16 flanges up to Class 600